Anhui YUANJING Machine Company
Anhui YUANJING Machine Company
Add to Cart
Light Pole Making Tanderm Press Brake Street Light Pole Production Line
it is suitable for one piece type polygonal and circle taper light pole. it is automatic welding line, the trolley with inverter speed adjustable motor can pull the light pole from small end to big end, The hydraulic cylinder through mechanical chain, worm wheel push the clamping wheel to close the pole and do welding at same time.
Light Pole Forming
Tandem hydraulic press brake is the Key forming machine;
Total machine length and tooling length shall be as long as pole height;
Press brake capacity shall be bigger enough and cost effective;
Machine throat depth, open height will limit max pole diameter.
Engineer can optimize bending process to make bigger range;
Octagonal (polygonal) pole bending can be like process of aside ;
Conic steel light pole bending will need special tooling;
| Capacity | 300MT x 2 | 400MTx2 |
| Length | 6000mm x 2 | 6000mm x 2 |
| Synchronize | Electric-Mechanic | Electric-Mechanic |
| Suitable Pole | Light pole | Light pole |
| Conic pole plate thickness | 3~4mm | 3-5 mm |
| Octagonal pole thickness | 3~6mm | 3-8 mm |
| Controller | Estun E21 | Estun E21 |
1. For long pole forming, machine will be as long as the pole;
2. Tandem hydraulic press brake means 2 or more machines linked together;
3. The press brakes shall be synchronized
4. Hydraulic system will give enough press force;
5. Air bending for Octagonal pole;
6. Full press for conic pole form;
7. Various tooling for different shape and thickness pole
8. The press brakes shall be synchronized