Anhui YUANJING Machine Company
Anhui YUANJING Machine Company
Add to Cart
Small Y32 series 4 four column hydraulic press 250 ton for sale 4 Column
Feature:
1. Heavy 4-post frame provides maximum rigidity and minimum deflection for accurate parts and long tool life.
2. Thick plates and large columns provide you with the stable platform you need for your demanding application.
3. Long bearing length offer improved stability and resistance to off-center loading.
4. PLC press control is flexible and safe. PLC controls allow for customized press cycles.
5. Dual Palm Button control: anti-tie down, non-repeat controls with ring guards; conforms to OSHA.
6. Adjustable proximity switches allows stroke adjustments in seconds.
7. Pressure control and gauge allow tonnage adjustment in seconds.
8. Selector switch modes of operation: jog (setup) and run (cycle).
9. Wide range of hydraulic systems to match your requirements.
10. Large reservoirs minimize the need for oil coolers.
11. Large daylight accommodates large dies. Special daylights and bed sizes are available.
12. Long stroke lengths are adjustable from about 1" to maximum. Special stroke lengths are available.
13. Pressure and distance reversal systems are standard.
Optional Accessories:
1.Movable worktable 2.Punching cushion equipment 3.Photo guard equipment
4.Stroke pressure value indicator 5.Industrial touch screen 6.PLC programmable controller.
The press has three-beam and four-pole structure,which means economical and practical.hydraulic control adopts plug-in valve integrative system,which means reducing leaking points,realiable motion and long service life.it could realize fixed pressure and fixed stroke,which means pressure maintaining and time delay.the working pressure and stroke could be adjusted in the specified range.centralize control button could offer three operation modes:adjustment,manual and semiautomatic.
Technical parameter:
| technical parameter | 100ton | 200ton | 300ton | 400ton | 500ton | 600ton | |
| master cylinder nominal pressure (KN) | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | |
| main cylinder perssure return (KN) | 180 | 250 | 630 | 510 | 930 | 1250 | |
| under the push-out pressure (KN) | 200 | 400 | 630 | 800 | 1000 | 1250 | |
| effective size of table (front back ×left right ) (mm) | 650×550 | 700×650 | 750×750 | 850×850 | 1000×1000 | 1200×1000 | |
| master cylinder stroke (mm) | 400 | 450 | 500 | 550 | 600 | 650 | |
| under the top cylinder stroke (mm) | 240 | 240 | 300 | 300 | 300 | 300 | |
| slide away from the table the largest opening (mm) | 600 | 650 | 800 | 850 | 900 | 950 | |
| speed (mm/s) | fast down | 180 | 180 | 150/200 | 200 | 200 | 200 |
| slow down | 10~25 | 8~18 | 10~20 | 10~20 | 10~20 | 10~20 | |
| return | 140 | 140 | 140 | 140 | 140 | 140 | |
| motor power (kw) | 7.5 | 15 | 30 | 44 | 44 | 60 | |
