Anhui YUANJING Machine Company
Anhui YUANJING Machine Company
Add to Cart
Servo Type CNC Turret Punch Press Machine With Auto Index
Main Features
New T30 turret punch presses are produced as a closed type rigit Steel construction into a rigit structure, the finite analysis system was used in the design and simulation process to allow minumum deflection during operation. No deflection between the turret and tools occurs during the punching process and it increase tool life. T30 series turret punch presses has 2 models with 27 station/700 stroke and with 33 station/900 stroke which helps to finish all the work at onces even on very complicated sheet products. So T30 turret punch presses provides a complete solution with optimum cost.
• Siemens AC servo motors on all axis
• High precious positioning possibility with linear sledge system on all axis.
• Platform type on bridge side or Portable CNC control panel
• CNC control outputs/inputs for vacum table & filtering unit
• High vacuming capability with lower energy consaption
• Independent cutting table system
• Multi head Plazma and multi head oxy fuel cutting possibilities.
• +/- 0,02 mm positioning accuracy.
• +/- 30m/min positioning speed.
- 'O' Frame design tested by Finite Element Analysis software, precisely machined and stress relieved to ensure high precision
- Hydraulic punching with indexable tool station through 360° in increments of 0.001°
- Punching, cutting and forming processes subject to optional tooling fitted -controlled by the CNC according to material
- Capable of producing not only 2D components but when fitted with special tools can create 3D forms which wouldn't be possible when using a profiling process
- High nibbling rate of 600 hits per minute in 1mm pitch
- High capacity motors and precision guides on all axes able to reach high operational speeds
- Rigid beam with fitted with two sheet clamps capable of positioning sheets of up to 8mm thickness
- Very accurate repeatability of 0.04mm
- Clamping force adjusted by CNC from 100kg to 1000kg
- Repositioning feature
- High processing speeds and data transfer rates
| No. | Name | Parameters | Unit | Remark |
| 1 | Nominal Pressure | 300 | KN | 30(T) |
| 2 | Rack Structure | “O” | closed | |
| 3 | Turret structure | Thick | mm | Up:80/down:70 |
| 4 | Mold structure | 85 series long oriented | Internationally general type | |
| 5 | Clamp structure / number | Full floating type | sets | 2 |
| 6 | Auto-index numbers | sets | 2 (optional) | |
| 7 | Auto-index transmission mode | Turbine and worm | ||
| 8 | Number of controlled axes | 3/4(X/Y/T/C) | axes | Auto-index (optional) |
| 9 | Repositioning cylinder | 2 | sets | |
| 10 | Countertop structure | Brushuniversal ball mixed | ||
| 11 | Turret station distribution | ABCD | standard | |
| 12 | Punching accuracy | ±0.1 | mm | |
| 13 | Repeat positioning accuracy | ±0.02 | mm | |
| 14 | Throat depth | 1280 | mm | |
| 15 | Punch stroke | 40 | mm | |
| 16 | Max. punching frequency | 800 | t/min | |
| 17 | Max. processing plate size | 2500/5000*1250 | mm | Secondary positioning |
| 18 | Max. processing plate thickness | 6 | mm | |
| 19 | Max. plate feeding speed | 60 | m/min | |
| 20 | Max. diameter (once punched) | 88.9 | mm | |
| 21 | Max. work piece weight | 150 | kg | |
| 22 | Turret rotary speed | 30 | r.p.M | |
| 23 | Main motor power | 11 | KW | |
| 24 | Gas consumption | 0.15 | m³/min | |
| 25 | Gas Pressure | 0.6 | MPa | |
| 26 | Dimension (L*W*H) | 5400*5200*2600 | mm | |
| 27 | Weight | ≈12 | T | |
| 28 | CNC system | FANUC OI-PD | ||
| 29 | Programming software | CNCKAD (genuine ) | ||
Die station allocated in Turret.
| Station Type | Tool Size(mm) | 16 station Turret | 20 station Turret | 24 station Turret | 32 station Turret |
| A | Φ1.5-φ12.7 | 6 | 8 | 12 | 16 |
| B | φ12.7-φ31.8 | 6 | 8 | 8 | 12 |
| C | φ31.8-φ50.8 | 2 | 2 | 2 | 2 |
| D | φ50.8-φ88.9 | 2 | 2 | 2 | 2 |
