Iron CNC Aluminum Cutting Machine 2000W 3000*1500MM Raycus System

2000W 3000*1500MM CNC Metal Fiber Laser Cutting Machine For Iron Stainless Steel Carbon Steel Aluminum Copper

Fiber Laser cutting is among the largest application for lasers in material processing. Fiber laser technology allows for small beam diameter therefore decreasing kerf width, decreasing heat penetration and increasing throughput. Also, the power consumption of Fiber laser is very low, no need maintenance,it's suits for batch production, high requirements with cutting quality and
cutting speed.
Compared with other laser source.

Main Features:
1. Low maintenance--- it's transmited by Fiber cable, no need reflecting mirrors, no need to adjust the light route;
2. Low consumption---The power is more than 30% lower than the ordinary cutting machine.
3. Maintenance-free---For the fiber laser cutter, the reflect lens are no needed. It will help to save a lot of time when
opticalpath is adjusted. The laser generator with longer lifetime which no need maintenance during usage.
4. Environment friendly--Laser cutting will not creates any gases for the special cutting technology for steel sheet.
5. Low power consumption--- Energy saving and environmental friendly, lowest power consumption as the highest photoelectric conversion with Fiber source. Only 20%-30% consumption compared with other laser cutting system.
6. Low gas consumption--- no need mixed gas for cutting, high pressure air can also cutting steel.
7. Maximum simultaneous positioning speed: 160m/min.
8 Precision: + - 0.05 mm.
9. Energy efficiency: greatly reduced power consumption.
10. Excellent cutting quality for fine thic kness and medium thickness sheet metals.

Laser head automatic focusing Quickly change the focusing mirror of different focal lengths,adapt to a variety of power processing ,to meet the cutting of different thickness plates. Quickly and accurately focus work more time-saving and better
	Height controller-BCS100 3.0 BCS100 capacitive height controller is a high-performance control device which uses closed-loop control method. Adapt to any cutting head and nozzle. Support alarm while hitting the board and beyond theedge. Support leapfrogs and segmented piercing. Edge seek function. Support functions to detect the head height in realtime.
Automatic lubrication system The function of the automatic oil pumps is mainly to perform regular quantitative oiling on the easily wearable guide rail,ballscrew and rack gear.It is by the digital controller to control the lubrication pump working cycle,lubrication time and intermittent time.
	Water Chilller The function of the water cooler is to protect laser source and confirm it could well work,when cutting the metal plates under high temperature during work. We only use brand-name water coolers with reliable quality.
Control Cabinet All the electric components are housed adn wire in a doubled-colored electric enclosure.This allows for easy access and service when needed.All wiring is tagged so that when service is required,the customer can easily navigate the cabinet.
	Laser source The new generation of laser has higher photoelectric conversion efficiency(>30%). Better and more stable beam quality,more powerful anti-high antiability,and the introduction of opticalfiber transmission system,to ensure more stable and precise cutting effect inthick plate cutting.